
DO YOU NEED MORE
MIXING TIPS?
TWO MIXING TIPS MAY NOT
HAVE BEEN ENOUGH.
Fill out the form below and we’ll send you
4 MORE for your KRAZY FIX FASTWELD jobs.
Offer only valid for 1 (ONE) FREE set
of static mixers per household.
At Krazy Products we are committed to helping you achieve superior results every time you use one of our adhesives. We value your business and thank you for trusting us to help you build and fix what matters in life.

READ INSTRUCTIONS BEFORE USING
STATIC MIXER
SYRINGE
PLUNGER
STEP 1
To prepare surface for bonding, use a cloth to wipe and thoroughly clean area
STEP 2
Replace gray stopper on the syringe with the static mixer or mixing tip
STEP 3
Remove black plug from the syringe and insert the black plunger into 2 respective holes
STEP 4
Press plunger slowly for controlled application and perfect mixing
STEP 5
Allow to set for 30 seconds for bonding application, 5 minutes for welding application
STEP 6
Close sides with respective gray stopper and black plug for long storage

WORKS EVERYWHERE
Bond Metals | Adhere Composites | Repair Electronics & Electrical Components | Fix High-Tension Electrical Insulators | Glue Fiber-Reinforced Plastic | Use on Vehicles, Snowboards, Aircrafts, & Bicycles
SERVICE TEMPERATURE RANGE
-40 to 248°F (-40 to 120°C)
CAUTION
MAY BE HARMFUL BY SKIN CONTACT AND BY BREATHING VAPORS/DUSTS.
MAY CAUSE SKIN BURN.
MAY CAUSE PERMANENT EYE DAMAGE.
MAY PRODUCE ALLERGIC REACTION BY INHALATION / SKIN CONTACT. AVOID INHALATION/INGESTION/SKIN CONTACT. KEEP OUT OF REACH OF CHILDREN.
FIRST AID TREATMENT: If eye contact occurs, rinse with tap water for 10 minutes.
If irritation persists, seek medical care.
Conforms to ASTM D4236
For further health information contact a poison control center or call:
EMERGENCY:
CONTACT CHEMTREC
1-800-424-9300
TECHNICAL DATA
PART A CONTAINS:
Cyanoacrylate as adhesive
PART B CONTAINS:
Acrylic acid as hardener.
Conforms to ASTM D-4236
