Krazy Strong, Krazy Fast solutions to help you fix what matters in life.
CLEAR
CONTACT ADHESIVE FOR HEAVY DUTY FABRIC
2.0 fl oz (59.1ml)
KRAZY® FIX
KRAZY® FIX CLEAR is a flexible contact adhesive designed for a permanent strong bond with heavy duty or tightly woven fabrics that do not require frequent machine washing and drying. Contact adhesive formulations are solvent based and designed to cure rapidly even in the absence of moisture or oxygen.
KRAZY® FIX CLEAR was made with a unique formulation to create a faster drying weatherproof bond and lower odor than previous generations of contact adhesives.
ADHESIVE COLOR: Clear
-
Tightly Woven Fabrics | Boat / RV Fabrics | Blinging Fabric | Patches | Awning Repair | Crafting Projects | Shoe Repair | Plastic Toy Repair | Countertop Repair | Laminating Flooring Areas | Tile Repair | Low Load-bearing Wood Joints | Pottery Repair | Glass Vase Repair | Plastic Laminate (+ large areas) | Decorative Laminates (+ large areas) | RV Countertop Remodeling or Upgrade Projects | She-shed Countertops | Playhouse Countertops | Lego Model Building | Interior Crown / Base Molding Repair | Posting Signs (to glass and other hard surfaces) | Bonding Glass Projects | Ceramic Flower Pot Repair | Leather Furniture Repair | Creating or Repairing Mirrors | Low Temp Gasket Sealant (garden hose)
-
Use in a well-ventilated area. Avoid prolonged breathing of vapors.
Krazy Fix Clear works well on non-garment fabrics (such as awnings, patches, boat and RV fabrics) if they are cleaned well and dried prior to application.
Take care not to apply so much it seeps through the fabric joint and becomes visible on the surface - as it may show slight discoloration.
Avoid applying to plush or loosely woven surfaces. Test first on plastics. May remove paints and varnish from finished surfaces.
-
1. Work in a well-ventilated area
2. Add adhesive to lightly cover both surfaces
3. Replace lid tightly on tube
4. Press both surfaces together for 1 minute
5. Let dry completely (up to 24 hours)
6. Allow 3 days before machine washing
-
DANGER:
EXTREMELY FLAMMABLE, VAPOR HARMFUL, CONTAINS PETROLEUM DISTILLATES. DO NOT USE NEAR SPARKS, FIRE, FLAME, HEATED SURFACES OR OTHER SOURCES OF IGNITIONS.Use in a well-ventilated area. Avoid prolonged breathing of vapors.
Causes eye, nose and throat irritation. Avoid contact with eyes and prolonged contact with skin.
In case of eye contact, flush eyes with water for 15 minutes.
If irritation persists, get immediate medical attention.
KEEP OUT OF REACH OF CHILDREN.
EMERGENCY:
CONTACT CHEMTREC
1-800-424-9300 -
Contact Adhesive General Purpose
Less than 55% VOC
Conforms to ASTM D-4236 -
FAST
FAST CURE POLYURETHANE SINGLES
3 Tubes | 0.14oz (4g), total 0.42oz (12g)
KRAZY® FIX
KRAZY® FIX FAST was specially formulated to be faster curing and simpler to use than other formulas on the market today. It requires no dampening, has a KRAZY® FAST set time for a polyurethane of only 10 minutes and is weatherproof once cured.
With origins stemming from aircraft production during WWII, polyurethane adhesives have many applications and benefits. KRAZY® FIX FAST is a polyurethane adhesive that bonds with almost any surface. Similar to epoxy in its strength, it is versatile and strong, but does not need to be mixed before use.
Our single use tubes were designed to help your purchase last longer, because once air or moisture enters a bottle of polyurethane adhesive it begins to cure. Single use tubes reduce the chance of reaching for your polyurethane adhesive only to find it's become hardened over time.
ADHESIVE COLOR: Light Brown
-
Commercial and Residential Construction | Woodworking Projects | End-grain Wood Joints (finger joints) | Household Décor | Pottery Repair | Glass Vase Repair | Posting Signs (to glass and other hard surfaces) | Bonding Glass Projects | Ceramic Flower Pot Repair | Crafting Projects
-
1. Clean the surfaces to be glued
2. Apply Krazy Fix Fast Cure Polyurethane
3. Clamp for 10 minutes
4. Sand and finish
-
KEEP OUT OF REACH OF CHILDREN.
Eye and Skin irritant.
Do not Swallow.
Keep away from eyes.
FIRST AID TREATMENT:
For eyes: flush immediately with tap water for 15 minutes.
For skin: rinse with water and soap. If swallowed, or irritation persists, seek medical attention immediately.This product can expose you to chemicals known to the State of California to cause cancer.
EMERGENCY:
CONTACT CHEMTREC
1-800-424-9300 -
CONTAINS:
Polymethylene polyphenyl isocyanate, 4, 4- diphenylmethane diisocyanate and methylene diphenylisocyanateConforms to ASTM D-4236
-
LIGHT CURE
LIGHT CURING SUPER GLUE
4g (0.14oz) | Fast Cure LED Light
KRAZY® FIX
KRAZY® FIX LIGHT CURE was designed for super glue applications where additional bonding reinforcement is required. This adhesive uses LED light to allow you to create corner welds, reinforcing beads, or fill in gaps.
Use this product when you want the speed of a traditional super glue but want added strength around the bonding joint.
KRAZY® FIX LIGHT CURE can also be used to simply reinforce weak points or joints that cured previously.
KRAZY® FIX LIGHT CURE cures within 5 seconds when using the supplied LED light.
ADHESIVE COLOR: Clear
-
Crafting Projects | Shoe Repair | Low Load-bearing Wood Joints on Small Wood Projects (like picture frames) | Pottery Repair | Glass Vase Repair | Model Building and Hobbies | Bonding Glass Projects | Phone Cable Repair | Drone Building and Repair | Ornament Crafting | Ceramic Flower Pot Repair | Creating or Repairing Mirrors | Fill Gaps | Reinforce Seams | Ceramic Repair | Jewelry and Beading
-
1. Screw the precision tip tight to the container (this will puncture the seal on the adhesive tube)
2. Apply adhesive to the surfaces to be joined
3. Hold for 30 seconds
4. Apply reinforcing corner beads or welds
5. Shine the supplied LED light about 1 inch over the bead for 5 - 10 seconds
-
IMMEDIATE BONDING OF THE SKIN, EYES OR MOUTH MAY OCCUR ON CONTACT. MAY BE HARMFUL IF SWALLOWED. EYE IRRITANT.
PRECAUTIONS:
Avoid ingestion and keep away from eyes.FIRST AID TREATMENT:
If eye contact occurs, rinse with water for 5 - 10 minutes. If irritation persists, seek medical care.
If swallowed, get medical attention. If skin bonding occurs, soak in acetone-based nail polish remover and carefully roll or peel skin apart. Do not pull. Contact may cause skin burn.EMERGENCY:
CONTACT CHEMTREC
1-800-424-9300 -
CONTAINS:
Cyanoacrylate Glue -
SUPER GLUE
REMOVER
GEL FORMULA FOR MAXIMUM CONTROL
2 TUBES NET WT 0.6oz (2x 0.3oz)
KRAZY® FIX
KRAZY® FIX SUPER GLUE REMOVER is perfect for removing KRAZY® GLUE!
Solvent and cleaner. Breaks bonds and removes hardened glue from all surfaces including skin. Removes acrylic, enamel, and epoxy paint over-spary and nail polish.
KRAZY® GLUE creates an instant bond that's ultra-strong and durable. Sometimes, KRAZY GLUE ends up where you don't want it to. With KRAZY® FIX SUPER GLUE REMOVER, your are able to clean up those accidents.
Gel formula designed for more control and less mess!
-
Removing hardened glue from all surfaces including skin.
Also removes: Acrylic, enamel, epoxy paint over-spray, and nail polish.
-
Protect work area. May damage varnish, painted, lacquered, plastic surface or clothing.
Pierce tube with top of cap.
To remove excess glue: Apply to a small cloth and rub affected area. Wipe with clean cloth. Repeat until all glue is removed.
To debond skin: Apply to affected area moving back and forth until skin becomes separated. Never pull or force. Wash skin.
To remove from skin: Soak skin in shallow, remover-filled dish until softened. Wash skin with soap and water to avoid irritation.
To dissolve an unwanted bond: Apply to all bonded sides. allow 15 minutes, or until loosened, then gently pry apart. To ensure the best possible bond before re-gluing, clean surface again with the remover.
To prepare surface for bonding: Apply to a cloth and wipe to thoroughly clean area.
-
EXTREMELY FLAMMABLE.
HARMFUL OR FATAL IF SWALLOWED.
VAPOR HARMFUL.
EYE IRRITANT.
CONTAINS: ACETONE
PRECAUTIONS: Do not smoke when using. Keep away from eyes. Avoid contact with heat, sparks and open flame. Vapors can ignite explosively. If using indoors turn off all pilot lights.
KEEP OUT OF REACH OF CHILDREN.
Use only with adequate ventilation.
FIRST AID TREATMENT:If eye contact occurs, rinse with tap water for 5 - 10 minutes. If irritation persists, seek medical care. If swallowed, do not induce vomiting. Call a physician or poison control center immediately. If symptoms occur, move to fresh air. If symptoms persist see a physician. For further health information contact a poison control center or call:
EMERGENCY CONTACT:
CHEMTREC
1-800-424-9300 -
CONTAINS: ACETONE
Conforms to ASTM D-4236
FASTWELD
HYBRID REINFORCED SUPER GLUE
0.35oz (10g)
KRAZY® FIX
KRAZY® Products help you feel like a pro.
Our Fastweld is strong like epoxy and fast like super glue.
It has just enough product for small-scale projects that require something Krazy Strong without the mess, smell or curing time.From filling gaps to welding bonds, you can sand, paint and even bend Krazy Fix Fastweld.-
Metal Coatings | Composites | Repairing Electronics & Electrical Components | LEDs | High-Tension Electrical Insulators | Paintbrush Manufacturing | Fixing Fiber-Reinforced Plastic Materials | Constructing Vehicles, Snowboards, Aircrafts, & Bicycles | Structural & Other Purposes
-
To prepare surface for boding, use a cloth to wipe and thoroughly clean area
Replace gray stopper on the syringe with the static mixer
Remove black plug from the syringe and insert the black plunger into 2 respective holes
Press plunger slowly for controlled application and perfect mixing
Allow to set for 30 seconds for bonding application, 5 minutes for welding application
After using, close sides with respective gray stopper and black plug and keep container tightly sealed in a dry, cool, and well ventilated place for long storage. Keep from freezing.
-
CAUTION:
MAY BE HARMFUL BY SKIN CONTACT AND BY BREATHING VAPORS/DUSTS. MAY CAUSE SKIN BURN. MAY CAUSE PERMANENT EYE DAMAGE. MAY PRODUCE ALLERGIC REACTION BY INHALATION / SKIN CONTACT. AVOID INHALATION/INGESTION/SKIN CONTACT. KEEP OUT OF REACH OF CHILDREN.
FIRST AID TREATMENT:
If eye contact occurs, rinse with tap water for 10 minutes. If irritation persists, seek medical care.
For further health information contact a poison control center or
EMERGENCY CONTACT:
CHEMTREC
1-800-424-9300 -
PART A CONTAINS: Cyanoacrylate as adhesive
PART B CONTAINS: Acrylic acid as hardenerConforms to ASTM D-4236